On this tab, you can view the properties and test specifications related information of the selected Inspection Section. 

SECTION: PROPERTIES

The following attributes are displayed in the Default view:

• Inspection Section: Displays the name of the Inspection Section which can be edited/updated.
• Linking Type: Displays the linking type. The applicable linking types are No Link, BOM, Size Chart, Spec Data Sheet, and Style Review.
• Repetition Type: Displays the Repetition Type such as All, Static Value, or Percentage Value. This is one of the key elements used by a company to communicate to their Quality Inspectors. Quality Inspectors should conduct their test activities with reference to the recommended value of this attribute.
  • All: A default value and it recommends that the relevant section should be inspected for all samples that are selected.
  • Static Value: A specific number of samples should be inspected for this section. This value is generally used for BOM related tests, where quality tests are performed once per inspection.
  • Percentage Value: A given percentage of the samples should be inspected for this section.
• Repetition Value: Displays the repetition value of the related section.
• Repetition Percentage: Displays the Repetition Percentage value of the related section.

SECTION: TEST SPECIFICATIONS

How to select Test Specifications for the selected Inspection Section

1. From the Parent column, mouse-over Actions, and then select Select Test Specifications. The Select Test Specifications dialog box is displayed with the available Test Specifications.
2. In the Select Test Specifications dialog box, select the check boxes corresponding to the required Test Specifications, and then click on Save.
   NOTE: In the Select Test Specifications dialog box, only the latest approved versions of Test Specifications are displayed.

The following attributes are displayed in the Default view:

• Parent: Displays the parent name of the Test Specification. Click on the Parent name, to view its properties and where it is used in the Inspections. 
• Name: Displays the name of the Test Specification.
• Description: Displays a brief description of the Test Specification.
• Code: Displays the code name of the Test Specification.
• State: Displays the state of the Test Specification.
  NOTE: If a newly approved version of the Test Specification is available, then the state of the related Test Specification is changed from APPROVED to SUPERSEDED. To retain the latest approved version of Test Specification in the Parent table, select the same Test Specification again through the Actions command, and then remove the Test Specification that is present in the SUPERSEDED state.
• Tags: Displays the applied tag names of the related Test Specification from the Home > Inspection > Setup > Test Specifications tab.
• Actions: This column provides the Remove option to remove the required Test Specifications from the Parent table. For more information, refer to Generic Features.

NOTE: The blank cell option initiates no action.

NOTE: The editable fields are displayed with a grey triangle in the lower-right corner of the cell.

NOTE: The commented fields are displayed with a red triangle in the upper-right corner of the cell.
___________________________________
Pre-requisites: Define Inspection;
                          Define Test Specifications.